Skoda Octavia Workshop Manual page 83

OCTAVIA
Edition 03.97
S00.5116.51.20
Shift Mechanism/Housing
Setting
- Move selector lever into position „P“.
K - Slacken screw -2- at the front ball socket -1-
of the selector lever cable.
- Likewise move gearbox selector lever -4- into
position „P“ (rear stop). The parking lock
should be engaged.
- Check whether the selector lever cable is
routed free of stress.
- Tighten screw -2- (5 Nm).
- After installing and setting the selector lever
cable, carry out a check.
- Press the lock button in the selector lever
grip and pull selector lever in position „P“
about 5 mm back and release.
♦ The lever should engage automatically in
the previous position.
- Press the lock button in the selector lever
grip and move selector lever in position „P“
about 5 mm forward and release.
♦ The lever should engage automatically in
the previous position.
- If the lever does not engage automatically,
repeat setting.
37
------------ ------------