Skoda Octavia Workshop Manual page 130

37
------------ ------------
Shift Mechanism/Housing
- Install the ATF pump seal.
- Fit the toroidal sealing ring to the ATF pump.
Note:
Make sure the toroidal sealing rings are correctly
fitted.
K - Install the ATF pump.
- Tighten the screws evenly crosswise.
Torque: 8 Nm.
Note:
The toroidal sealing ring must not be damaged.
- Subsequently tighten the screws by 90°.
Further tightening may occur in successive
steps.
- Perform a check measurement of the clutch
play ⇒ page 37-60.
- Install seal plug with control valve housing
and oil sump ⇒ page 38-12.
K - Install cover (arrow) with seal and spacer
bush. Torque: 8 Nm.
K - Install ATF overflow tube -1- (2 Nm) and lock-
ing screw -2- (15 Nm) with new sealing ring.
- Install torque converter ⇒ page 32-3.
- Install gearbox ⇒ page 37-18.
OCTAVIA
Edition 12.98
S00.5116.55.20