Skoda Octavia Workshop Manual page 190

39
28 - Screw, 12 Nm
♦ insert with locking agent AMV 185 101
A1
29 - Lock
30 - Circlip
♦ only remove after removing the joint
flange as the pressure spring (Pos.
20) is preloaded
♦ removing and installing ⇒ figure 7
31 - Circlip
♦ only remove after removing the joint
flange as the pressure spring (Pos. 9)
is preloaded
♦ removing and installing ⇒ figure 7
------------ ------------
Final Drive/Differential
32 - Seal
♦ always replace
33 - Cover
♦ for differential
34 - Screw, 28 Nm
♦ insert with locking agent AMV 185 101
A1
Note:
After setting the tapered roller bearing lock the
bearing housing and adjusting ring.
OCTAVIA
Edition 12.98
S00.5116.55.20