Skoda Octavia Workshop Manual page 196

39
for
♦ Removing and installing ⇒ page
39-14, Removing and installing differ-
ential
♦ Always replace
7
♦ Always replace
♦ Removing and installing ⇒ page
39-14, Removing and installing differ-
ential
9 shaft/joint
♦ Removing and installing ⇒ page
39-14, Removing and installing differ-
ential
10 T roller
♦ Remove and install only once setting
ring heated
♦ Use drift for removing
♦ Inserting ⇒ Fig. 4
------------ ------------
Final Drive/Differential
roller
race
11 T roller
♦ Remove item 12 and 13 before pull-
ing off
♦ Pulling off ⇒ Fig. 1
♦ Pressing on ⇒ Fig. 2
12
♦ Remove together with speedometer
drive gear -item 13-
♦ Use drift for fitting on
13 drive
♦ Use drift for removing
♦ Fit on together with driver bush
-item 12-
14 washer
♦ Place into differential housing before
inserting the differential bevel gears
1 differential
♦ Inserting ⇒ Fig. 3
1 differential
♦ Inserting ⇒ Fig. 3
17 C
♦ Removing ⇒ page 39-18, Fig. 6
1
♦ Take out tensioning sleeve for remov-
ing ⇒ Fig. 5
♦ Use drift for removing
♦ When inserting, do not damage thrust
washer assembly
19 T
♦ Replace
♦ For securing the shaft of the differen-
tial bevel gears
♦ Removing and installing ⇒ Fig. 5
OCTAVIA
inner race
Edition 03.97
S00.5116.51.20