Skoda Octavia Workshop Manual page 142

37
Table of shims -C-:
Gap dimension „x" (mm)
... 2.54
2.55 ... 3.09
3.10 ... 3.49
3.50 ... 3.89
3.90 ... 4.29
4.30 ... 4.69
4.70 ... 5.04
5.05 ... 5.25
------------ ------------
Shift Mechanism/Housing
Shims (mm)
1.4
1 + 1
1.2 + 1.2
1.4 + 1.4
1.6 + 1.6
1.8 + 1.8
1.2 + 1.2 + 1.6
1.2 + 1.2 + 1.8
- Determine thickness of the shims according
to the table and refer to the spare part cata-
logue to determine the spare part number.
- Perform control measurement of the clutch
clearance after fitting the ATF pump ⇒ page
37-60.
Control measurement (clutch clearance)
- Clutch clearance can only be measured af-
ter installing the ATF pump.
- Reverse gear-clutch -K1- must be installed.
- Attach dial gauge holder to gearbox housing
and place dial gauge with 1 mm bias on the
turbine shaft.
Note:
The gearbox must be put into the installed posi-
tion so that the turbine shaft can move.
K - Pull out and re-insert turbine shaft (stiff) and
read off clearance on dial gauge.
Clearance:
minimum = 0.5 mm
maximum = 1.2 mm
OCTAVIA
Colour of shims
white
blue + blue
green + green
white + white
black + black
grey + grey
green + green + black
green + green + grey
Edition 06.03
S00.5116.60.20