Skoda Octavia Workshop Manual page 143

OCTAVIA
nd
IV - Setting 2 and 4
- Install components for setting 2
gear brake -B2- without adjusting dial (Pos.
11), without the last outside disk (Pos. 10)
and without helical spring (Pos. 6) ⇒ Assem-
bling planetary gearbox ⇒ page 37-41.
1 - Gearbox housing
♦ Planetary gear installed up to free-
wheel
2 - Circlip
♦ for supporting tube
3 - Supporting tube -B2-
♦ for disk packet of -B2-
♦ different lengths depending on the
number of installed inside disks
♦ assigned as spare part to the gear-
box code letters
♦ fit in such a way that the groove en-
gages the freewheel wedge
4 - Outside disk -B2-
♦ 3 mm thick
Edition 12.98
S00.5116.55.20
Shift Mechanism/Housing
th
gear brake -B2-
nd th
and 4
5 - Helical spring
♦ insert 3 helical springs after installing
the first outside disk (Pos. 4)
6 - Helical spring
♦ do not install to set -B2-
♦ insert 3 helical springs before install-
ing the last outside disk
7 - Spring
♦ 3
♦ assigned as spare part to the gear-
box code letters
8 - Inside disk -B2-
♦ part number ⇒ page 00-2
♦ assigned as spare part to the gear-
box code letters
9 - Outside disk -B2-
♦ always install 2mm thick outside disks
♦ part number ⇒ page 00-2
10 - Outside disk -B2-
♦ 3 mm thick
♦ do not install to set -B2-
11 - Adjusting dial
♦ do not install to set -B2-
♦ 1 or 2 adjusting dials may be installed
12 - Retaining ring
♦ To set -B2- the smooth side is posi-
tioned on the last inside disk (Pos. 8)
37
------------ 37-61 ------------