Skoda Octavia Workshop Manual page 115

OCTAVIA
III - Removing and installing freewheel and reverse gear brake -B1-
Notes:
Summary ⇒ page 37-30.
Disassembling planetary gear ⇒ page 37-35.
Assembling planetary gear ⇒ page 37-41.
1 - Circlip
♦ for supporting tube -B2-
♦ fitting location: open ends of circlip
point towards freewheel retaining
wedge
2 - Circlip
♦ for freewheel
♦ fitting location: open ends of circlip
point towards freewheel retaining
wedge
3 - Freewheel with piston -B1-
♦ disassembling and assembling
⇒ page 38-3
♦ before disassembling the freewheel
remove the control valve housing and
sealing plugs ⇒ page 38-12 -Pos 2-
and gearbox speed sender -G38-
⇒ page 38-23 -Pos. 29-
♦ assemble with mounting ring MP
3-491
Edition 12.98
S00.5116.55.20
Shift Mechanism/Housing
4 - Disk spring
♦ curved side points to freewheel
5 - Actuating plate -B1-
♦ fit smooth side towards the disks
♦ different thickness depending on the
♦ assigned as spare part to the gear-
6 - Inside disk, -B1-
♦ piece number inside disks -B1-
♦ put new inside disks in ATF for 15
7 - Outside disk, -B1-
♦ piece number outside disk -B1-
8 - Adjusting dial
♦ determine thickness ⇒ set reverse
♦ 1 or 2 adjusting dials may be fitted
9 - Gearbox housing with assembled
planet carrier
number of inside disks fitted
box code letters
⇒ page 00-2
mins before fitting
⇒ page 00-2
gear brake -B1-, page 37-54
37
------------ 37-33 ------------