Skoda Octavia Workshop Manual page 157

OCTAVIA
Edition 12.98
S00.5116.55.20
Gears/Hydraulic Control
K Fig. 1
Removing
- compress piston ring and release by hand
- expand piston ring on both sides and remove;
do not remove from groove on one side only.
Installing
- insert piston ring in groove.
- to lock compress piston ring and guide the
joints over one another.
K Fig. 2
- carefully press the piston cover down until
the circlip -arrow- can be removed and fit-
ted.
K Fig. 3
- make sure the piston ring joints are inter-
locked.
Removing and installing piston
ring
Removing and installing the circlip
Checking fit of piston ring
38
------------ ------------