Skoda Octavia Workshop Manual page 160

38
------------ ------------
Gear/Control
14 - Ribbon cable with plug
♦ Removing and installing ⇒ page 38-18
♦ With cable duct and connector
♦ Can also be installed or removed with
the gearbox mounted
15 - Bracket for plug of ribbon cable
16 - 20 Nm
♦ For bracket
17 - Sealing plugs
♦ Take out free wheel before installing
and removing.
♦ Insert in such a way that the lug is
seated in the groove at the housing
⇒ Fig. 2
♦ Place O-rings onto the sealing plug
18 - O-ring
♦ Always replace
19 - O-ring
♦ Always replace
20 - Actuator rod for manual slider
♦ Setting ⇒ Removing and installing
slide valve body, page 38-18
K Fig. 1 Slide valve body identification
Identification characters are embossed in iden-
tification tag. The identification tag must remain
with the slide valve body.
Assignment of slide valve body/gearbox ⇒ page
00-2.
OCTAVIA
Edition 06.03
S00.5116.60.20