Skoda Octavia Workshop Manual page 129

OCTAVIA
Edition 12.98
S00.5116.55.20
Shift Mechanism/Housing
Note:
When replacing the
♦ Gearbox housing
♦ Supporting tube
♦ ATF pump
♦ Retaining ring
♦ Or the disks
Set the 2
37-61.
K - Install the -B2- disks as follows:
- First install a 3 mm thick outside disk.
- Insert three helical springs in the outside
disk.
- Insert pressure springs (arrow).
- Install all disks up to the last outside disk.
- Before installing the last 3mm thick outside
disk fit three helical springs on the pressure
springs.
K - Install adjusting dial -a-.
- Position retaining ring -b- on the adjusting
dial. Smooth side to the dial.
nd and 4 th gear brake -B2- ⇒ page
37
------------ 37-47 ------------