Skoda Octavia Workshop Manual page 158

38
------------ 38-12 ------------
Gears/Hydraulic Control
K Fig.
-
Important!
Do not run engine if oil sump is removed or with-
out ATF in engine and do not tow vehicle.
Notes:
♦ The control valve housing or the printed con-
ductor can also be removed with the gear-
box installed.
♦ After re-installing the oil sump, inspect ATF
level and top up ⇒ page 37-22.
♦ Always replace the control valve housing
which is dirty or faulty.
♦ The parts shown in the illustration which fol-
lows can be removed with the gearbox in-
stalled.
♦ Rules for cleanliness when carrying out work
on automatic gearbox ⇒ page 37-28.
♦ Repair instructions ⇒ page 00-5.
♦ Coat O-rings with ATF. Other lubricants
cause operational problems of the hydraulic
gearbox control.
and installing control
OCTAVIA
Edition 03.97
S00.5116.51.20