Installing Disk Shelves
This section contains installation procedures for the DE2-24C, DE2-24P, and Sun Disk Shelves.
Before beginning installation, review the prerequisites and appropriate hardware overview in
"Installation Prerequisites and Hardware Overviews" on page
within the rack and other considerations, see
Use the following procedures to install disk shelves:
"Installing a DE2-24C Disk Shelf" on page 57
■
"Installing a DE2-24P Disk Shelf" on page 62
■
"Installing a Sun Disk Shelf" on page 67
■
Installing a DE2-24C Disk Shelf
Use the following procedure to install an Oracle Storage Drive Enclosure DE2-24C, which
requires four standard mounting rack units (4RU), or twelve rack holes, of vertical space in the
cabinet.
To review
Before You Begin
■
Shelves" on page
To prevent the cabinet from tipping, always load the heaviest equipment, which are disk
■
shelves, starting from the bottom of the cabinet.
To best prepare for cabling disk shelves to controllers, now and in the future, mount
■
controllers in the middle of the cabinet.
Screws are not provided for installation into a cabinet with M6-sized threaded holes.
■
Caution -
the weight of the chassis. Attempting this procedure alone could result in equipment damage or
personal injury. Do not lift the chassis using the power supply handles.
1.
Extend all anti-tilt and stabilization devices from the bottom of the cabinet.
"Prerequisites for Installation" on page 11
19.
This procedure requires a minimum of two people, or a mechanical lift, because of
11. For disk shelf placement
"Cabinet Configuration Guidelines" on page
and
"Overview of Disk
15.
Installing Disk Shelves
57