Throttle Mixing High Point(T-Mix Hipoint); Throttle Mixing Reverse(T-Mix Reverce); Throttle Mixing Curve(T-Mix Curve); Throttle Mixing Delay(T-Mix Delay) - Ko Propo EX-1 Instruction Manual

Hide thumbs Also See for EX-1:
Table of Contents

Advertisement

Throttle Mixing High Point
(T-Mix HIPOINT)
Adjust the maximum amount of throttle to be applied to the front
brake servo.
If 3CH and 4CH are assigned to the brake servo, the value will
be set to 0.
High Position
(white square)
Setting Range
0 - 150%(
Default
An overly high setting value will increase load on the servo and
lead to it being damaged. Check carefully while adjusting.
The amount of movement may become very small if the throttle
high point is set to a low value and if the throttle mixing center is
set to a high value toward forward acceleration.
Forward movement will be inoperable if the value is set to 0.
Throttle Mixing Reverse(T-
Mix REVERCE)
This function reverses the front brake servo's movement
direction. It is useful for when servo output movement does not
match inputs after the servo has been installed.
Setting Range
NOR
, REV
(Normal)
(Reverse)
An incorrect brake servo movement direction will increase load
on the servo and lead to it being damaged. Check carefully while
adjusting.
Brake Position
Center Position
(black square)
(black square)
:100%)
(
:NOR)
Default

Throttle Mixing Curve(T-Mix CURVE)

This function sets the signal conversion rate to a curve to
enable quicker or milder response.
(N:Neutral F:Forward B:Brake)
Setting Range
(
:0%)
Default
FORWARD:-100 - 100%
BRAKE:-100 - 100%
Positive values (+1 to +100) equal high initial response followed
by mild response.
Negative values (-1 to -100) equal a mild initial response followed
by high response.

Throttle Mixing Delay(T-Mix DELAY)

Delays the operation of the front wheel servo brake.
Setting Range
OFF, 1 - 100%(
This delay comes into effect when the signal first begins to enter
the brake range and is deactivated thereafter.
If the front brakes operate quickly, the car may spin or lose
its balance. In this case applying throttle mixing delay can be
effective.
43
:OFF)
Default

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents