4Ws Mixing(4Wsmix); 4Ws Mixing Mode(4Wsmix Mode); 4Ws Mixing Left(4Wsmix Left); 4Ws Mixing Center(4Wsmix Center) - Ko Propo EX-1 Instruction Manual

4WS Mixing(4WSMix)

This function is related to an R/C car's 4-wheel steering feature.
If 3CH or 4CH is assigned to control the rear axle, it will operate
in conjunction with 1CH (steering). The direction of the rear axle
steering may also be changed.
[Functions]
4WS Mixing Mode
Choose from four types of 4-wheel steering controls.
4WS Mixing Left
Modify the rear axle servo movement range when steering
is turned to the left.
4WS Mixing Center
Modify the rear axle servo's neutral position when steering
is at neutral.
4WS Mixing Right
Modify the rear axle servo movement range when steering
is turned to the right.
4WS Steering Travel
Modify the movement range of the rear axle servo.
4WS Mixing Reverse
Modify the rear axle servo direction.
4WS Mixing Key
Assigns ET keys to be used for 4WS Mixing.

4WS Mixing Mode(4WSMix MODE)

Choose from four types of 4-wheel steering controls.
Setting Range ( :NORMAL)
Default
NORMAL
(front and rear axles turn in the same direction)
REVERSE
(front and rear axles turn in opposite directions)
F STEER
(steer front axle only)
R STEER
(steer rear axle only)
ET lever may be used for activation if is assigned to 4WS Mixing
Mode.
,
,
,

4WS Mixing Left(4WSMix LEFT)

Adjusts the rear axle servo movement range when steering is
turned to the left.
Equivalent to (Balance L) in the [Steering Balance] function.
Left Position (white square)
Center Position (black square)
Right Position (black square)
Setting Range 0 - 100%(
If the rear axle servo's direction has been reversed, use [4WS
Mixing Reverse] to adust.
This setting percentage is a ratio against the movement angle
setting in the [4WS Mixing Travel] function.
If the 4WS Mixing trim is set to a large value, a large left/right
value discrepancy may result. If adjusting 4WS Mixing Left for the
first time, follow the procedures below.
Set 4WS Mixing trim value to 0.
Adjust 4WS Mixing trim so that the car drives in a straight line
when steering is in neutral position.
Use 4WS Mixing Travel to match the overall steering angle
range.
Use 4WS Mixing Left and 4WS Mixing Right to match the left/
right turning radii.

4WS Mixing Center(4WSMix CENTER)

Adjust the rear axle servo's neutral position.
Equivalent to the [Steering Sub Trim] function.
Center Position (white square)
Left Position (black square)
Right Position (black square)
Setting Range -50 - 50%(
The setting range cannot exceed what is set by [4WS Mixing
Travel] or [4WS Mixing Left] and [4WS Mixing Right].
37
:70%)
Default
:0%)
Default