Amp Mixing(Amp Mix); Amp Mixing Mode(Ampmix Mode) - Ko Propo EX-1 Instruction Manual

Amp Mixing(AMP Mix)

Used when the front and rear wheels are controlled by separate
ESCs and motors.
If 3CH or 4CH is set to the front-wheel drive function, it will
operate in conjunction with 2CH's throttle operations.
[Functions]
Amp Mixing Mode
Choose from five 4-wheel drive modes.
Amp Mixing Throttle Hold
Set either the front or rear wheels to be driven at a certain
speed.
For (F HOLD) and (R HOLD).
Amp Mixing High Point
Modify the maximum amount of throttle to be applied to the
front wheels.
Amp Mixing Brake
Modify the maximum amount of reverse (brake) to be applied
to the front wheels.
For (NORMAL).
Amp Mixing Reverse
Modify the movement direction of the front wheels.
Amp Mixing Trim
Modify the neutral position of the front wheels.
Amp Mixing ET Mode Setting
Enables 4 wheel drive [Mode] to be changed via ET lever.
Amp Mixing Key
Assigns an ET lever to be used for Amp Mixing.

Amp Mixing Mode(AMPMix MODE)

Choose from five 4-wheel drive modes.
Setting Range ( :OFF)
Default
NORMAL
(drives both front and rear wheels)
BURN
(drives rear wheels only)
DIG
(drives front wheels only)
F HOLD
(drives front wheels at a set speed)
R HOLD
(drives rear wheels at a set speed)
ET lever may be used for activation if is assigned to Amp Mixing
Mode.
39
,
,
,
,