Throttle Mixing Steering(T-Mix Steer); Throttle Mixing On/Off(T-Mix On/Off); Throttle Mixing Key(T-Mix Key) - Ko Propo EX-1 Instruction Manual

Throttle Mixing Steering(T-Mix STEER)

Full braking can be weakened or made even stronger in
accordance with steering input.
Example
When a 1/5 scale R/C car is driven for a long duration, loss of
front tire grip would lead to understeer. Throttle Mixing Steering
can be used to apply stronger braking in this case. Use this
function in conjunction with Throttle Mixing On/Off.
Setting Range -100 - 100%(
The same effect can be obtained regardless of which direction the
steering is turned in.
Use of Throttle Mixing Steering may increase load on the servo
and cause increased wear or damage. Check the servo while
adjusting.
Throttle Mixing On/Off
(T-Mix ON/OFF)
Enables Throttle Mixing to be activated/deactivated.
Setting Range ON, OFF(
Default
Convenient for when you wish to activate/deactivate front wheel
braking according to the corner.
Useful for driving at the circuit as well as checking settings.
:0)
Default
:OFF)

Throttle Mixing Key(T-Mix KEY)

Assigns ET keys to be used for Throttle Mixing.
Setting Range ( :OFF)
Default
BRAKE :OFF, ET1 - 5
(T-Mix BRAKE)
CENTER
(T-Mix CENTER)
HIPOINT
(T-Mix HIPOINT)
DELAY :OFF, ET1 - 5
(T-Mix DELAY)
STEER :OFF, ET1 - 5
(T-Mix STEER)
ON/OFF
(T-Mix ON/OFF)
These keys may also be assigned with [SETUP].
Convenient for when you need to adjust Throttle Mixing settings.
It is also convenient if you are using [DELAY], [STEER], or [ON/
OFF] functions.
These keys must be set for both front right brake (3CH) and front
left brake (4CH).
44
:OFF, ET1 - 5
:OFF, ET1 - 5
:OFF, ET1 - 5