Startup Screen And Initial Screen - Ko Propo EX-1 Instruction Manual

●Startup Screen and Initial Screen
When the transmitter is switched on, the startup screen will display, followed by the initial screen.
Pressing the ENTER key during the startup screen will allow you to proceed to the initial screen.
Startup Screen
Initial Screen
Model Number:
Model Name:
Steering Trim Monitor:
Throttle Trim Monitor:
Function Monitor:
AUT:Throttle Auto Start
ABS:Throttle ABS
SOR:Steering Travel Override
TIM:Timer Activated (including Throttle Start Ready)
Power Source Type:
LP:Li-Po
LF:Li-Fe
Notice)
Voltage: Displays the current power source voltage.
Operation Time:
2.4G Band:
Response Mode:
ADV:Advanced High Speed
Control Mode:
On the 4CH response output will be displayed.
--:OFF
2WAY:
3WAY:
5WAY:
Direct Button:
Press the ENTER key
Version Information:
Displays the version of the program that is installed in the Master Unit's
CPU.
This product's performance may be upgraded via paid or free upgrades. Check the KO
Propo website for information regarding such upgrades. (http://www.kopropo.co.jp)
Displays the currently selected model number.
Displays the name of the currently selected model number.
Displays the position of the steering trim.
Displays the position of the throttle trim.
Functions that are in active will be lit up.
Displays the type of battery being used.
DR:R03/AAA/UM4 Alkaline Batteries
NI:Ni-MH
If you switch battery types, make sure to also change the [Battery Management] setting.
Displays how long the transmitter has been used.
Displays the 2.4G Band Mode.
Displays the Steering (S) and Throttle (T) Response
HSPD:Super High Speed
Displays 3CH (3) and 4CH (4) control mode.
ANLG:
2WAY 4WS:4WS Mixing
3WAY AMP:Amp Mixing
5WAY
TH-M:
Displays the functions assigned to each of the 4 buttons.
to proceed to [Main Menu].
(p.18)
(p.25)
(p.53)
(p.52)
G:GENERAL
NORM:Normal Speed
(p.34)
ANALOG
Throttle Mixing
16
(p.18)
(p.20)
IUP:Idle Up
ACC:Throttle Acceleration
BOR:Brake Override
DBK:Drag Brake
(p.52)
F:FRANCE
(p.50)
(p.51)