Setting Up The Lpd Print; Setting Up The Ipp Print - Toshiba GA-1191 Setup Manual

Setting up the LPD print

In LPD Print, you can set the LPD print options to enable the LPD/LPR print service.
1
2
3
1) Enable LPD
Enable or disable LPD print service.
2) Port Number
If enabling the LPD, enter the LPD port number. Generally "515" is used.
3) Banners
Select whether printing a banner page for each print job using LPR printing.
When printing from Macintosh computer using LPR printing, the PostScript code will be
printed instead of a banner page. If any users will print from Macintosh computers using LPR
printing, please disable the "Banners" option.

Setting up the IPP print

In IPP Print, you can set the IPP Print options to enable the IPP print service.
1
2
3
4
5
6
7
8
9
1) Enable IPP
Enable or disable IPP print service.
2) Port80 Enable
Enable or disable the Port80 for IPP printing. Port631 is usually used for the IPP access so
users must specify to the URL, i.e. "http://<IP address or DNS name>:631/Print", for the IPP
port. When this is enabled, this equipment allows IPP access through the Port80, which is
the default port for the HTTP access so users do not have to specify the port number in the
IPP port, i.e. "http://<IP address or DNS name>/Print".
3) Port Number
If enabling the IPP, enter the IPP port number. Generally "631" is used.
4) URL
Display the URL for IPP printing. You cannot change the URL for IPP printing. This URL
should be set as the print port when users set up the printer driver for IPP printing.
Setting up Print Service Settings (Printing Function) 113