Service Work
13
14
3.5.1.4 Replacing the Joint Tubes
1) Remove the front part of the frame (see Page 12).
2) Unscrew the rear wheel adapter and remove (see Page 12).
3) Remove the cross-brace (see Page 14).
4) Remove/replace the joint tubes (see Fig. 15).
5) To reassemble, perform these steps in reverse order. Tighten the frame tubes with 23 Nm.
15
3.5.1.5 Replacing the Seat Tube Supports
1) Slightly fold the wheelchair (see Fig. 16).
2) Unscrew the seat tube supports Allen head screws, wrench size 3 (the support with side panel attachment device
as well if necessary) (see Fig. 17).
3) Remove/replace the supports.
4) To reassemble, perform these steps in reverse order. Tighten the Allen head screws to 4 Nm.
02/2011
15