Other Accessories; Retrofitting A Lap Belt; Retrofitting A Tray; Appendices - Otto Bock Avantgarde CV Service Manual

Appendices

3.13 Other Accessories

3.13.1 Retrofitting a Lap Belt

► Tighten the lap belt screws on the back rest tube to 7 Nm. The lap belt mounting point is the upper free hole at the
rear part of the frame.

3.13.2 Retrofitting a Tray

The tray can be attached to the standard/height-adjustable desk side panel:
1) Remove the protective foil from the tray.
2) Slide the tray corresponding to the seat width onto the arm rests evenly.
4 Appendices

4.1 Technical Data

Avantgarde CS/CV/CLT – General data
Weight
Max. load capacity (in kg)
Weight (in kg; with seat
width 44 cm)*
Transport weights (in kg;
with seat width: 44 cm)*
Seat width (in cm)
Seat depth (in cm)
* The weights indicated can vary, depending on the choice of options and variants.
Avantgarde – Overall length (in cm)
Seat depth Lower leg
length
min./max.
36 30
55
38 30
55
50
158
CV
140
approx. 14.2
Frame: 9.5
Footrest: 0.9
24" rear wheel: 1.25
32 – 52
36 – 52
22" rear wheel
Forward Rear
axle position position
78.5 82
85 88.5
78.5 84
85 90.5
CS
140
approx. 13
Frame: 10.5
24" rear wheel: 1.25
32 – 52
36 – 52
24" rear wheel
axle Forward Rear
axle position position
84.5 84.5
91 91
84.5 86.5
91 93
CLT
100
approx. 12 (adjustable variant)
approx. 11 (welded variant)
Adjustable frame: 9
Welded frame: 8
24" rear wheel: 1.25
32 – 52
36 – 52
MTB 24" + 25" rear wheel
axle Forward Rear
axle position position
85.5 85.5
92 92
85.5 87.5
92 94
axle
02/2011