Replacing The Side Panel Mounting; Replacing The Seat Tube Support; Replacing The Retaining Clip - Otto Bock Avantgarde CV Service Manual

3.9.2.2 Replacing the Side Panel Mounting

1) Remove the desk side panel (see Fig. 99).
2) Unscrew the size 3 Allen head screw (see Fig. 100).
3) Remove/replace the side panel mounting.
4) To reassemble, perform these steps in reverse order. Tighten the Allen head screw to 5 Nm.

3.9.2.3 Replacing the Seat Tube Support

For the replacement see Page 15.

3.9.2.4 Replacing the Retaining Clip

1) Remove the desk side panel.
2) Unscrew the size 5 Allen head screw on the retaining clip (see Fig. 101).
3) Replace/position/bolt down the retaining clip.
02/2011
97
99
101
Service Work
98
100
102
35