Assembly A: Frame; Replacement Work On The Frame; Replacing The Front Frame Part - Otto Bock Avantgarde CV Service Manual

Service Work
SN:
B Foot rest accessories Heel strap
C Seat
D Back / push handles
E Side panels
Side panel accessor­
ies
F Caster wheel
G Rear wheel
Rear wheel accessor­
ies
H Wheel locks / brakes
Wheel lock accessor­
ies
Accessories
Do the wheelchair settings match the user's requirements?
The maintenance service was performed by:

3.5 Assembly A: Frame

3.5.1 Replacement Work on the Frame

3.5.1.1 Replacing the Front Frame Part

1) Remove the rear wheels and flip up the foot plates.
2) Remove the side panels (see Page 33).
3) Slightly fold the wheelchair.
4) Unscrew and remove the caster wheel assembly from the lower frame tube (see Fig. 4).
→ The lower frame tube is detached from the rear part of the frame.
5) Lay the wheelchair on its back and unscrew the upper frame tube (see Fig. 5).
12
1. Function/setting
(depending on equipment)
Cross-brace
Seat upholstery
Seat cushion
Back upholstery
Back tubes
Angle adjustment
Push handles
Height setting
Swivel mechanism
Removability
Arm rest padded, swing-away
Tray
Tyres (wear)
Air pressure
Caster wheel journal angle
Screw connections on the frame
Swivelling of the caster forks
Running behaviour of the wheels
Swivelling of the caster forks
Tyres (wear)
Running behaviour of the wheels
Spokes / push rings
Quick-release axles
Wheel camber
Rear wheel attachment device
Drum brake
Hub brake
One-arm drive
Wheelbase extension
Spoke protectors
Shock absorber
Braking function
Swing-away mechanism
Wheel lock lever extension
Tray
Lap belt
2. Inspected for dam­
age/deformation
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
on:
3. Screw connections
inspected
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
02/2011