Replacing The Calf Pads; Replacing The Retaining Plate - Otto Bock Avantgarde CV Service Manual

Service Work
3) Insert the Allen head screw.
4) Tighten the Allen head screw to 8 Nm.

3.6.2.7.3 Replacing the Calf Pads

1) Unscrew the calf pad with retaining plate from the foot rest (see Fig. 50).
2) Unscrew the calf pad from the retaining plate (see Fig. 51).
3) Install the new calf pad with retaining plate on the foot rest. The slots and the alternative holes can be used to
adjust the position and angle.

3.6.2.7.4 Replacing the Retaining Plate

1) Unscrew the size 10 Allen head screw.
2) Replace and install the retaining plate.
24
49
50
52
51
02/2011