Assembly B: Footrest; Adjusting The Foot Rests/Tube Foot Rest/Foot Plates; Replacement Work On The Cv Model; Replacing The Foot Rest - Otto Bock Avantgarde CV Service Manual

3.6 Assembly B: Footrest

3.6.1 Adjusting the Foot Rests/Tube Foot Rest/Foot Plates

All instructions concerning the adjustment of the foot rests are included in the Instructions for Use (qualified personnel)
– order number 647G585.

3.6.2 Replacement Work on the CV Model

3.6.2.1 Replacing the Foot Rest

1) Open the calf strap or pull it off the retaining lug on the swivel segment.
2) Push the swivel handle of the foot rest to the rear.
3) Swing the foot rest outwards and to the side by 90° (see Fig. 39).
4) Remove the foot rest upward and replace (see Fig. 40).
5) To reassemble, perform these steps in reverse order.

3.6.2.2 Replacing the Foot Rest Bar/Swivel Segment

1) Remove the foot rest.
2) Unscrew/remove the size 4 Allen head screw on the swivel segment (see Fig. 41).
3) Remove the foot rest bar from the swivel segment. Replace the foot rest bar/swivel segment if necessary.
4) Push the foot rest bar at least 60 mm into the swivel segment (see Fig. 42).
5) Tighten the Allen head screw on the foot rest bar to 10 Nm.
02/2011
37
39
Service Work
38
40
21