Installation / Adjustment Of The Anti-Tipper; Installing The Anti-Tipper - Otto Bock Avantgarde CV Service Manual

3.5.3 Installation / adjustment of the anti-tipper

CAUTION
Incorrect fitting of anti-tipper / missing anti-tipper
Risk of tipping of the user to the rear
► Check correct installation and adjustment of the anti-tipper:
► Depending on the adjustment of the chassis, the wheelchair centre of gravity and the experience of the user, an
anti-tipper may be necessary.
CAUTION
Anti-tipper not intended
Risk of tipping of the user to the rear
► On the Avantgarde CLT with fixed welded fitting, installation of an anti-tipper is not intended. Therefore examine
the user intensively for suitability (adequate physiological capabilities) before supplying the user with this version.
This wheelchair version is intended only for experienced users with sporting ambitions who, thanks to their
physiological capabilities, are able to handle the wheelchair proficiently.

3.5.3.1 Installing the anti-tipper

The anti-tipper can be installed at 5 positions on the vertical accessory mount (see Fig. 22, item 1).
1) Push the anti-tipper tube from below into the vertical accessory mount.
2) Tighten the anti-tipper tubes in the vertical accessory mount with the Allen head bolt to 7 Nm (see Fig. 22, item 2).
02/2011
20
22
Service Work
21
17