Replacing The Fold-Down Back Tubes; Retrofitting With The Back System "The Back; Component Group E: Side Panels; Replacement / Retrofit / Setting The Side Panels - Otto Bock Start 3 Series Service Manual

4.4.7 Replacing the fold-down back tubes

Tocompletelyreplacethebacktubes,pleaseproceedasdescribedunderSection4.4.3"Height
setting/Replacementofthebacktubes".
Toreplacethefold-downmechanism,loosenthetwoscrewsbelowaswellasthetwoscrews
abovethehinge(Fig.45)andpullthehingeoutofthetwotubeends.
Forassembly,pleaseproceedinreverseorder.

4.4.8 Retrofitting with the back system "The Back"

Pleaseobservetheinformationgivenintheproduct'sInstructionsforUse647H491(nofigure).
4.5 Component Group E: Side Panels

4.5.1 Replacement / Retrofit / Setting the side panels

a) Desk side panels
Releasethesidepanelfromtheanteriorguideusingthelockinglever(Fig.46).Swingtheside
panelbackuptoa45°angle.
Thenpullthesidepanelupwardstothebackoutoftherearanchorage(Fig.47).
Forassembly,pleaseproceedinreverseorder.
Start Series | Service Manual
45
46

Settings / Replacement / Retrofit
Ottobock | 29
47