Replacing The Tube Foot Rest Mounting; Assembly C: Seat; Replacing The Standard/Business Seat Upholstery - Otto Bock Avantgarde CV Service Manual

Service Work

3.6.3.5 Replacing the Tube Foot Rest Mounting

1) Unscrew the size 3 Allen head screw on the tube foot rest mounting (see Fig. 60).
2) Remove/replace the tube foot rest mounting.
3) Tighten the Allen head screw on the tube foot rest mounting to the point that flipping up and down without clear­
ance is possible.

3.7 Assembly C: Seat

3.7.1 Replacing the Standard/Business Seat Upholstery

1) Slightly fold the wheelchair and remove the seat cushion.
2) Remove the protective cap (see Fig. 61).
3) Remove/replace the seat upholstery from the cross-brace (see Fig. 62).
4) If necessary, tighten the seat upholstery with the aid of the hook-and-loop connector on the bottom of the seat
upholstery (see Fig. 63).
5) Push the new seat upholstery onto the cross-brace.
6) Push on the protective cap.
7) Unfold the wheelchair. In doing so, the cross-brace must seat fully in the support guides.
26
57
59
58
60
02/2011