Adjusting The Rebound Damping Of The Shock Absorber - Husqvarna 701 Enduro 2017 Repair Manual

9 SHOCK ABSORBER, SWINGARM
45
(EU)
Turn adjusting screw Q clockwise with a screwdriver up to the last percepti­
ble click.
0
• Info
Do not loosen fitting
0!
o
Turn counterclockwise by the number of clicks corresponding to the shock
absorber type.
Guideline
V00494-10
Compression damping, low-speed
Standard
15 clicks
Info
Turn clockwise to increase damping; turn counterclockwise to reduce
damping.
I
(US)
Turn adjusting screw O clockwise with a screwdriver up to the last percepti­
ble click.
0
• Info
Do not loosen fitting
O'
Turn counterclockwise by the number of clicks corresponding to the shock
absorber type.
Guideline
))
> w
#
^F00623-10
Compression damping, low-speed
Standard
15 clicks
Info
Turn clockwise to increase damping; turn counterclockwise to reduce
damping.
I
9.3 Adjusting the rebound damping of the shock absorber
A Caution
Risk of injury Parts of the shock absorber will fly off if the shock absorber is disassembled incorrectly.
The shock absorber is filled with highly compressed nitrogen.
Please follow the description provided.
Turn adjusting screw Q clockwise up to the last perceptible click.
Turn counterclockwise by the number of clicks corresponding to the shock
absorber type.
Guideline
— —
X M
\
55®
M
/
Rebound damping
Standard 15 clicks
f /
Info
Turn clockwise to increase damping; turn counterclockwise to reduce
damping.
I
•6 ^ 2
S01000-10