Shock Absorber Compression And Rebound Damping Adjustment - Husqvarna CR 125 2011 Workshop Manual

Workshop Manual Ed. 06-2011
SETTINGS AND ADJUSTMENTS
CR 125 2011 - WR 125 2011

Shock absorber compression and rebound damping adjustment

Adjustment of the compression stroke is independent from the rebound stroke.
+
A) COMPRESSION - Standard setting:
3
1) Low damping speed:
-15 clicks (± 2 clicks)
(adjuster 1)
1
3) High damping speed:
-
-15 clicks (± 2 clicks)
(adjuster 3)
To reset the standard setting, turn upper adjusters (1) and (3) clockwise until
reaching fully closed position. Then turn them back the number of clicks speci-
H06712
fied above.
In order to obtain a smooth braking efficiency, turn the adjusters counter clock-
wise. Vice versa to obtain a harder braking action.
B) REBOUND - Standard setting:
-18 clicks (± 2 clicks)
To reset the standard setting, turn lower adjuster (2) clockwise until reaching
fully closed position. Then turn it back by the mentioned clicks.
In order to obtain a smooth braking action, turn the adjuster counter clockwise.
Vice versa to obtain a harder braking action.
D.24