Rebound Shock Absorber Hydraulic Damping Adjustment; Fork Adjustment; Fuel Supply Hose Inspection And Replacement - Husqvarna TR 650 TERRA 2013 Workshop Manual

4
Workshop Manual Ed. 09-2012
SETTINGS AND ADJUSTMENTS
TR 650 TERRA 2013 - TR 650 STRADA 2013

Rebound shock absorber hydraulic damping adjustment

It is possible to adjust the rebound travel of the shock absorber.
B) REBOUND - Standard setting:
- 11 clicks
(adjuster 1)
1
To reset the standard setting, turn lower adjuster (1) clockwise until reaching fully
closed position. Then turn it back the number of clicks specified above.
In order to obtain a smooth braking action, turn the adjuster counter clockwise.
Vice versa to obtain a harder braking action.
H11706

Fork adjustment

On the fork installed on this motorbike version, it is not possible to perform any
type of adjustment.
1

Fuel supply hose inspection and replacement

- Remove the saddle as described in the relevant paragraph.
- Check fuel supply hose (1) conditions; if cracked, swollen, kinked, etc. it is
necessary to change it as follows:
- Press the ring nut (2) and unfasten the union (3).
- Open the clamps (4) and detach the pipe (1) from the unions (3) and (5).
H11707
- Replace the pipe (1) and close the clamps (4) on unions (5) and (3).
2
- Refit the union (3) by pressing it down.
H11708
3
H11709
During this operation, make sure that you do not damage the hose
holder coupling on the throttle body.
5
4
D.16
H11710