47
Removing the bearing flange
Remove the four screws and tap the flange
with a plastic hammer until it rotates. Then
tap until it can be removed as shown in the
figure.
Removing the rocker pin - 750
Screw tool # 88713.0260 in the threaded
hole of the rocker pin. With an 11 mm
wrench hold the central screw. With a
17 mm wrench, rotate the puller until the
pili can be removed from the head.
Removing the rocker
pin - 860
Screw tool # 88713.0120 in the threaded
hole of the rocker pin. Rotate the tool as
shown in the figure until the pin is removed
from the head.