Ducati 750 Sport Owner's Manual page 32

26
Removing the oil filter (cartridge replace-
ment) - 860
With a 17mm wrench first undo the nut,
then the cover and the cartridge.
Removing the lock ring and ignition
distributor control gear
Provisionally fit the taper gear and the
alternator rotor on the driving shaft. Then
fit tool # 88713.0108 on the shaft to
prevent the engine from rotating. Then
remove the half-bush and Seeger ring
which retain the control gear. Open the
lock washer and remove the lockring and
gear, using the special box wrench
# 88713.0105.
Removing the bearing holding bush for the
ignition distributor axle
Remove the bush and bearing, using puller
# 88713.0111. This operation is necessary
when correcting bevel gear play.