Download  Print this page

Ducati 750 Sport Owner's Manual Page 36

Ducati motorcycles owner's manual.
Hide thumbs


Refitting the transmission shaft
Fit the transmission shaft, complete with
its gears, being careful to position the
thrust washer against the fourth speed
meshing gear fixed on the chain pinion
shaft. Another thrust washer must then be
placed in the upper part of the shaft. This
will act as a shim against the bearing on the
clutch side half-crankcase.
Starter assembly
This figure shows the various components
of the starter assembly, exactly as they are
fitted: the thrust washer, the gear, the
second thrust washer, the Seeger ring,
slide coupling, spring, special washer and
outer stop ring.
Fitting the slide coupling in the starter
The slide coupling must be fitted with the
cam positioned towards the bottom, since
it has to enter the proper seat of the clutch
side half-crankcase in order to disengage
the starter.


Table of Contents

   Also See for Ducati 750 Sport

This manual is also suitable for:

750 gt860

Comments to this Manuals

Symbols: 0
Latest comments: