Ducati 750 Sport Owner's Manual page 39

"
Cl ~
WUíT~
i
~~ ¿
i
~~,.
~-~~
.i~J~ "~
33
Fitting the oil pump - 860
Before starting fitting it is necessary to
check all details, so that no faulty gears or
dented matching surfaces remain: Then fit
the pump assembly and after, having
tightened the'two screws fixing the cover,
check that the gears can rotate freely.
Fit the spring and the ball in the housing
and securely fit the pump assembly on the
crankcase fixing it with two screws, to be
tightened with a 8 mm wrench. The figure
shows the different components.
Fitting the oil pump - 750
First fit the spring, then the ball and the
pump assembly previously assembled with
the gears, the cover and the gasket. Screw
in the four screws and secure them with
the safety wire. Once the pump is fitted,
rotate it to ensure it is working properly.
The fitted oil pump - 860
The figure shows the oil pump fitted in the
proper position.
Important: When the two screws are
tightened, rotate the pump to ensure it is
working properly. Even a small dent or
foreign matter between the matching
surfaces can cause malfunction.