Ducati 750 Sport Owner's Manual page 42

36
Fitting the timing control gear and pump
The figure shows the double gear fitted to
the crankshaft. Before fitting the gear it is
advisable to check the key and its seat
condition.
Fitting the two gear holding spindles
The figure shows the two spindles holding
the gears already fitted in their seats.
Before fitting, remember to put the thrust
washers under the spindles.
Fitting the two timing gears
The figure shows the two timing gears
already fitted with reference marks to-
wards the central gear.
Place the thrust washers on the two gears.
They will be the support for the bearings.