Fitting the clutch side cover - 860
Carefully check the surfaces for dents and
gasket residue, which must be removed
with a smooth file.
Then fit the new gasket and the cover,
tighten the 10 screws using a 5mm
Fitting the distribution side cover-860
Carefully follow the instructions already
given with the previous figure and check
that the magnet rotor is clean and without
metallic splits. Place the gasket and fit the
cover, taking care not to damage the
alternator winding. Tighten the 10 screws
using a 5 mm hexagonal wrench.
Replacing the oil filter cartridge - 860
Using a 17 mm wrench remove the bolt,
the cover and the filter cartridge.
The oil filter cartridge must be replaced
after the first 1000 Km; then after 5000 Km
and later every two oil changes, viz. at
15000,25000 etc. Km.