Oce ColorWave 650 User Manual page 196

The system monitor and the system states
Overview of the system states
#
State
'User intervention re-
quired'
'System memory is full'
'Out of toner'
'Sleeping...'
'Warming up...'
'Initializing...'
'Printer paused'
'Processing...'
'Ready to print'
'Printing:' <job-name>
'Processing:' <job-
name>
'Receiving:' <job-
name>
196 Chapter 5 - Use the printing system
Icon Description
The user is requested to go to the printer and fol-
low the instructions displayed on the operator
panel.
Status message when printer does not print because
the system memory is full.
Status message when printer does not print because
the printer is out of toner.
Energy saving state: State when not all functional-
ity is available due to printer sleeping.
State when not all functionality is available due to
printer warming up.
State when the system software is initializing.
The system pauses the print queue but keeps access
to all other functionality.
The system is receiving or processing data.
State when there is no active job and no waiting
job.
When a job arrives, no user intervention is needed
to start printing.
State when a print job is active.
The system is processing the job data.
The system is receiving the job data.