Oce ColorWave 650 User Manual page 42

Print a job in Roll-to-Roll mode
Print a job in roll-to-roll mode
#
Step
1
2
3
42 Chapter 2 - Get to know the printing system
Action
Start your print job.
Wait for your print job to come out
of the external output.
Note:
Align the core roughly to the
print by moving the winder
When your print is long enough, tape
the leading edge in the middle onto
the core.
How to tape your print onto the core
depends on the selected winding di-
rection.
• Reverse (your prints are winded
print-side out).
• Forward (your prints are winded
print-side in)
Make sure that the media is taped
flatly on the core to avoid creases
during winding.
Note:
You can check the direction
by pushing the manual feed
button.
Illustration
[33] Print-side out
[34] Print-side in