Update The Océ Colorwave 650 Poster Printer Software - Oce ColorWave 650 User Manual

Update the Océ ColorWave 650 Poster Printer software
Update the Océ ColorWave 650 Poster Printer software
Introduction
If you receive software update CDs or DVDs, you can follow the procedure below to
update the Océ ColorWave 650 Poster Printer software.
Caution:
You must wait approximately 15 minutes. Do not touch anything while the installation
is in progress.
Note:
Before you can start an update, you must log on as system administrator or power user.
Note:
The software update procedure can take quite some time.
Note:
The system checks the current software version and displays a warning message when
necessary. A software upgrade or downgrade is not possible in all situations.
Open the update wizard
When you start the update:
Open a web browser on a workstation connected to the network.
1.
Enter the address: "http://<Océ Productname address>" (for example
2.
http://134.188.26.173) or "http://<Océ Productname Hostname>" (for example
http://OceColorWave650PosterPrinter) to access Océ Express WebTools.
Click on the 'Support' - 'Update' tab in Océ Express WebTools and log on as system
3.
administrator (default: "SysAdm").
Once you have logged in correctly, you can find the current software version and instal-
lation date.
Click on the 'Update' button. A wizard will open to help you install the updates and
4.
patches.
106 Chapter 4 - Configure the printing system