Oce ColorWave 650 User Manual page 296

Priorities in the color management settings
Stages in the process of making a color print
The Océ Express WebTools offers 2 default paths for color settings based
on the file type of the document:
• 'Color management settings for TIFF and JPEG files'
' 'Color management settings for TIFF and JPEG files' (RGB input)' on
page 297
' 'Color management settings for TIFF and JPEG files' (CMYK input)'
on page 298
• 'Color management settings for PostScript and PDF files'
'Color management settings for PostScript and PDF files (RGB input)'
on page 299
'Color management settings for PostScript and PDF files (CMYK input)'
on page 300
These settings are applied when the controller cannot recognize or detect
any color settings for the file to be printed.
Note:
It is advised to align the color management settings that have been made in the different
stages before you start the print job. The color space of the document and the settings
for the print have to match. This means that if you have set the color settings in more
than 1 stage of the process described above, you must check if the color settings do not
counteract with each other.
296 Chapter 8 - Print quality and Print productivity
Priority
4