Oce ColorWave 650 User Manual page 52

Correct use of the Océ delivery tray
Solve problems with the output delivery of your Océ delivery tray
#
Prob-
lem
1
2
52 Chapter 2 - Get to know the printing system
Action
Your copies are not neatly
stacked
To end up with neatly
stacked print jobs, the cor-
rect attachment of the Océ
delivery tray to your Océ
ColorWave 650 Poster
Printer is essential.
Move the Océ delivery tray
towards the rear side of the
printer in a parallel fashion.
Make sure you attach the
Océ delivery tray to the
printer as indicated in the
figures. Following this proce-
dure ensures an optimal po-
sitioning of the device and
minimizes the chances of
damaging your Océ delivery
tray and Océ ColorWave
650 Poster Printer.
Your copies show dog ears
at the edges
Adjust the position of the
left and right output guide
flaps to suit the width of the
media you print on. When
an output guide flap is posi-
tioned exactly on the edges
of your print output, this
may result in dog ears.
It is advised to leave the
middle output guide flap in
the exact middle of the Océ
delivery tray.
Illustration