Oce ColorWave 650 User Manual page 113

Illustration
'Configure proxy' (applicable if proxy settings are required)
Set up the proxy server:
1.
• 'Proxy enabled'
• 'Proxy hostname' please enter the fully qualified hostname of the proxy server
• 'Proxy port'
Authentication setup (if needed):
2.
• 'Proxy requires authentication'
• 'Proxy authentication: user'
• 'Proxy authentication: password'
• 'Proxy authentication: domain'
Click 'Ok' to finalize proxy configuration.
3.
'Check connection'
After 'Configure proxy' setup (if applicable), it is possible to test the connection.
1.
Click on 'Check connection' to test the connection between the Océ ColorWave 650
Poster Printer and Océ.
The result is given (within 30 seconds): 'The system is connected to Océ Remote Service'.
Note:
Now the system is able to send data to Océ. Examples: Océ Meter Manager information
or Océ 'Remote Service'.
Chapter 4 - Configure the printing system
Remote Service
113