Oce ColorWave 650 User Manual page 33

#
Part
1 Paper Guidance
Rack
2 Flanges
3 Core
4 Scroller assy
5 Manual feed but-
ton
6 Take-up direction
switch
7 Power switch
8 Sensor
9 Positioning devices
Description
The paper guidance rack guides the print from the ex-
ternal output to the take-up unit.
The flanges make sure that your prints are wound up
correctly.
The core.
The scroller assy holds the core on which you can wind
your prints.
The manual feed button allows you wind up manually.
With this switch, you can choose the winding direction:
• Reverse (your prints are winded print-side out).
• Forward (your prints are winded print-side in).
The power switch
The take-up unit can only operate when the power
switch is in the 'I' position.
The sensor enables the automatic take-up of your
prints.
The positioning devices connect the printer to the take-
up unit.
Chapter 2 - Get to know the printing system
Introduction to the take-up unit
turns the take-up unit on and off.
33