Finish A Job In Roll-To-Roll - Oce ColorWave 650 User Manual

Step
7
Set the printer back to Roll-to-Sheet mode
Go to 'Preferences' - 'System properties' - 'Job management' - 'Enable roll-to-roll mode'.
1.
Click 'Off'.
2.
Click 'Ok'.
3.
Action
Put the roll with one end on
the floor and tape the other
end to eliminate any tele-
scoping effect.
The roll is now ready.
Finish a job in Roll-to-Roll mode
Remarks
Chapter 2 - Get to know the printing system 47