Oce ColorWave 650 User Manual page 70

Run the installation wizard from the operator panel
9
10
11 /
B
70 Chapter 3 - Prepare the printing system for use and get started
Action
The following message is displayed:
'This wizard assists you to connect the printer to the
network'.
Use the 'Upper right softkey' to go to the next step.
Select one of the following options.
• 'Auto detect (IPv4 only)'
Use the 'Scroll wheel' to select 'Auto detect (IPv4
only)' if the system must automatically detect your
network settings. Confirm your entry with the
'Confirmation key' above the 'Scroll wheel'.
Use the 'Upper right softkey' to go to next step and
continue with step 11.
• 'Advanced setup'
Use the 'Scroll wheel' to select 'Advanced setup' if
you want to configure the network settings manual-
ly. Confirm your entry with the 'Confirmation key'
above the 'Scroll wheel'.
Use the 'Upper right softkey' to go to the next step.
You must now first follow the procedure to enter
the network settings manually. (see
network settings manually' on page
The following message is displayed:
'Auto network discovery in progress'
Illustration
'Configure the
73)