Oce ColorWave 650 User Manual page 107

Update the Océ ColorWave 650 Poster Printer software
Once you have opened the update wizard:
Click on "OK". A dialog window appears.
1.
- If you want to update the software of the operating system, click on the upper
"Browse..." button. Browse to the directory where the operating system software upgrade
file is located. Select the correct file. Click 'Open'.
- If you want to update the software, click on the lower "Browse..." button. Browse to
the directory where the software upgrade file is located. Select the correct file. Click
'Open'.
Click on "OK".
2.
You must wait approximately 15 minutes for the files to upload. The progress bar, at the
bottom of the page, indicates the progress.
When the upload is finished, click on "OK". A dialog window appears.
3.
Click on "OK" to start the installation. When you do this, a warning message appears.
4.
The printer operator panel now displays the message 'Do not switch off the system.',
'The system is installing the software.', 'This may take a while.'.
When the software update is finished, the warning message disappears.
Caution:
You must wait for approximately 15 minutes. Do not touch anything while the installation
is in progress.
Click on "OK" to return to Océ Express WebTools.
5.
Result
Your software update is finished.
Note:
There is no specific user feedback on the result of the software update. Please check the
current software version of your system in the 'Support' - 'Update' tab.
Update the Océ ColorWave 650 Poster Printer software
Chapter 4 - Configure the printing system 107