Oce ColorWave 650 User Manual page 143

Setting
'Media selection policy'
'Print cut method'
'Custom print length'
'Add leading strip'
'Add trailing strip'
Overview of the 'Print job defaults' - 'Layout'
Editable for Key operator and Power user.
'Preferences' - 'Print job defaults' - 'Layout'
#
Setting
'Scale'
Description
If you select 'Media source': 'Automatic' you can also set
the 'Media selection policy' setting.
When you select 'Automatic next larger' the printer auto-
matically selects the media roll with the exact media size
for your print job. If the media roll with the exact media
size is not available the next larger media roll on the printer
is selected.
When you select 'Automatic exact fit' the printer automat-
ically selects the media roll with the exact media size for
your print job. If the media roll with the exact media size
is not available a media request pops up.
• Select 'Standard' to cut the print to a standard media
size (DIN, ANSI, ...)
•
Select 'Synchro' to cut the print at the end of the image.
The system cuts at the measured length of the original
times the scale factor.
• Select 'Custom' (numeric) to cut the print on a specified
length. The print length is defined by value of the setting
'Custom print length'.
Print length if the 'Print cut method' is set to 'Custom'.
When you enter a value, the Océ ColorWave 650 Poster
Printer adds a blank strip of the specified length at the be-
ginning of the output.
When you enter a value, the Océ ColorWave 650 Poster
Printer adds a blank strip of the specified length at the
bottom of the output.
Description
'Scales the image with a defined percentage or automatically
to the media size.' (100% is no scaling)
Chapter 4 - Configure the printing system
Set the default print job settings
143