Avaya Octel 50 Installation Manual page 98

Setting Up the System
Fax Parameters - #60
Fax Mail Allowed
When/How to Use
Related Parameters/Features
If Set Too High
If Set Too Low
Min
Fax Parameters - #61
Use a Fax Cover
Sheet
When/How to Use
Related Parameters/Features
If Set Too High
If Set Too Low
Min
Fax Parameters - #62
Number of
Attempts when
Sending a Fax
When/How to Use
Related Parameters/Features
If Set Too High
If Set Too Low
Octel 50 Installation Guide
Max Default
– – No
Max Default
– – No
Configuring System Setup Parameters
This parameter determines whether Octel 50 system
subscribers are permitted fax mail.
This parameter permits fax mail for all mailboxes on the
Octel 50 system. Mailboxes must also be enabled for send
or receive faxes in the class of service.
None.
Not applicable.
Not applicable.
Requires
Restart Dependent
No
This parameter specifies whether the Octel 50 system
attaches a fax cover sheet when it delivers faxes retrieved
from a V-Tree.
If you enable this parameter, you must create a system-wide
fax cover sheet. You can only have one fax cover sheet in
the system.
A Fax cover sheet is not sent from a V-Tree when Use
Immediate Fax Delivery Mode in V-Trees is enabled.
Not applicable.
Not applicable.
Requires
Restart Dependent
No
This parameter specifies the number of times the Octel 50
system attempts to send a fax for V-Tree fax retrieval and
fax mail when it encounters a busy or no answer condition
at the destination fax machine.
The default should be acceptable for most systems.
If you set this parameter to 0, and the Octel 50 system
encounters a busy or no answer condition at the destination
fax machine, the fax is not delivered.
The Fax Delivery Retry Delay (Minutes) determines how
long the Octel 50 system waits between attempts to deliver
a fax.
The maximum is the default value for this parameter.
The Octel 50 system may be unable to deliver the fax.
Switch- Set by
Integrator
No No
Switch- Set by
Integrator
No No
8-38