Rerecording A Phrase - Avaya Octel 50 Installation Manual

Understanding Phrase Files and Using V-Edit
7. To review the previous phrase in the file, press <->, then repeat step 6. To review the
next phrase in the file, press <+>, then repeat step 6. To select and review other
phrases in the same file, repeat steps 3 through 6.
To listen to the last 3 seconds of a phrase:
1. Open the phrase file in which you want to review phrases, if it is not already open.
2. From the Main menu, press <E> to access the Edit menu. The first phrase in the file
is graphically displayed.
3. To select a phrase, press <N>.
4. At the phrase prompt, enter the number of the phrase you want to review, then press
<ENTER>. The selected phrase is graphically displayed.
5. To review the last 3 seconds of the phrase, press <ALT+P> or the <PAGEDOWN>
key. The last 3 seconds of the phrase voice.
6. To review the last 3 seconds of the previous phrase in the file, press <->, then repeat
step 5. To review the last 3 seconds of the next phrase in the file, press <+>, then
repeat step 5. To select and review other phrases in the same file, repeat steps 3
through 5.

Rerecording a Phrase

To rerecord an existing phrase:
1. Open the phrase file that contains the phrase you want to rerecord, if it is not already
open.
2. From the Main menu, press <E> to access the Edit menu. The first phrase in the file
is graphically displayed.
3. To select a phrase, press <N>.
4. At the phrase prompt, enter the number of the phrase you want to rerecord, then
press <ENTER>. The selected phrase is graphically displayed.
5. Press <R>.
6. To begin recording, press <SPACEBAR> and begin speaking.
7. To end recording, press <SPACEBAR>.
Octel 50 Installation Guide
Using Dialogic V-Edit
14-29