Subscriber Parameters - Avaya Octel 50 Installation Manual

Setting Up the System
Related Parameters/Features
If Set Too High
If Set Too Low
Min

Subscriber Parameters

The Subscriber parameters control password security features and message
maintenance features for subscriber mailboxes.
Subscriber Parameters - #28
Enable Extended
Password
Security
When/How to Use
Related Parameters/Features
If Set Too High
If Set Too Low
Min
Octel 50 Installation Guide
Max Default
0 10 0
Max Default
– – No
Configuring System Setup Parameters
If the switch does not provide positive disconnect, set this
parameter higher than 0. This prevents the Octel 50 system
from recording blank messages when callers have hung up
during recording.
None.
When set too high, the Octel 50 system may delete actual
messages.
If you leave this parameter set to 0, and your switch does
not provide positive disconnect, mailboxes may receive
blank messages.
Requires
Restart Dependent
No
This parameter determines whether the Octel 50 system
requires subscribers to press <#> after they enter their
passwords to gain immediate access to their mailboxes.
If you enable this parameter and a subscriber enters the
correct password, but does not press <#>, the Octel 50
system pauses after the last digit before permitting access
to the mailbox.
If you disable this parameter, the Octel 50 system allows the
subscriber access as soon as they finish entering the last
digit of the correct password.
For most Octel 50 systems, leave this parameter enabled to
provide added security for mailboxes.
Enable Extended Password Security is only used if
mailboxes have passwords.
Not applicable.
Not applicable.
Requires
Restart Dependent
No
Switch- Set by
Integrator
No No
Switch- Set by
Integrator
No No
8-18